PE PP Cosmetic Small Plastic Bottle Production Machine / Molding Machine SRB70D-2, Small Cosmetic Bottles HDPE Blow Moulding Machine, Shampoo Bottle HDPE Blowing Machine
QUICK VIEWS
| 1. SRB70D-2 is double station double head hdpe bottle blow molding machine for 500ml to 1500ml generally. 2. Its output for 1000ml cosmetic bottle is 650Pcs/hour, output for 1L small square container is 600 Pcs/hour. 3. On-line auto-deflashing mould is supported to achive scraps automatic removing. Bottles come out through product collectie guidance shelves, the scraps comes out along sliding channels to machine front. |
TECHNICAL PARAMETERS
| Machine Model | Double Station Extruder Blowing Machine |
| Max Product Volume | 2 L |
| Machine Weight | 5.5 Tons |
| Machine Size | 3.8 x 2.2 x 2.5 m |
| Screw Diameter | 70 mm |
| Plasticizing Capacity | 90 KG |
| Clamping Force | 68 KN |
| Platen Size | 320 x 390 mm |
| Platen Opening Stroke | 150~500 mm |
| Max Mould Size | 360 x 360 mm |
| Double Head Central Distance | 160 mm |
| Max Product Diameter or Width | 135 mm |
| Material Cutting Method | Hot Cutting |
| Max Die Diameter | 100 mm |
| Total Power | 48.5 KW |
| Average Energy Consumption | 31.5 KW |
Click picture above to see video for making 750ml cosmetic bottle
PRODUCTION ARRANGEMENT
| 1. Machine Foundation Size: 3.5 x 2 m 2. Production Area: 7 x 5 m 3. Minimum Workshop Height: 3.0 m 4. Air Supply Requirement: 1.0m3/min, 0.6Mpa 5. Water Supply Requirement: 8 Tons 6. Machine Power Consumption: 32.5 KW 7. Production Line Power Consumption: 45 KW 8. Whole Line Electricity Arrangement: 250 Amps 9. Minimum Workers Number: 2 Workers |
PRODUCTION FLOW
The working flow of 5L double station plastic container manufacturing machine production flow is basically like this. The PLC in the electronic control case sends the instruction, the hydraulic system receives the instruction, the fuel tank and the motor start to operate, drives the screw to run, and extrudes the embryo through the die head. The opening and closing mold begins to be closed, the needle is blown, cooled, and plastic products are formed.
MACHINE FEATURES
1. Control Unit: WISETECH total machine programmable controller controller and ture colorful touch panel. English parameter process setting, state monitoring and products counting are convenient and intuitionistic. PLC automatic temperature control model.
2. Hydraulic Unit: It adopts international famous Japan YUKEN brand hydraulic valve and seal, proportional control. And has features of high stationarity and reliability, accurate operation, long longevity, quick response and so on.
3. Extrusion Unit: Hard gear surface decelerator; famous Delta inverter adopts Italian technology; Screw speed regulation adopts variable-frequency speed regulation control system. It has the features of stable rotate speed, powerful power, energy-saving and so on. Mixing screw has wide applicability to raw materials and the plasticization quality is even better. Energy-saving machine barrel and A-alloy heaters are adopted for heating
4. Die Head Unit: With single cylinder material-center-in accumulator head, is smooth and dependable. This die head adopts German technology and is made by special imported steel.
5. Clamping Unit: Adopts fixed mould open-closing system,fast and balanced.
6. Blow Fitting Unit: Down blowing fitting is equipped.
7. Lifter Unit: Four turbine reducer liter, lifting balance, quick, stable.
8. Electrical Components: All of the electrical components are made in Japan and Taiwan.
Product Tags:
|
|
PE PP Cosmetic Small Plastic Bottle Production Machine / Molding Machine SRB70D-2 Images
|
